This is the first copy of my new project. I will make a 3D print of the pictures of a very good painter friend of mine.

You can find his works at the link below:

https://www.instagram.com/paintlikethereisnotomorrow/

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

 The Model is 182.67x220mm in size

 You may print at higher layer heights below the Min Depth of 0.48mm

 The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:

PLA+ Sunlu Black Transmission Distance: 0.5

PLA+ Sunlu Red Transmission Distance: 6

PLA+ Sunlu Sky Blue Transmission Distance: 4

PLA+ Sunlu White Transmission Distance: 5

This print uses 4 unique filaments

Swap Instructions:

Start with Black

At layer #14 (1.2mm) swap to Red

At layer #19 (1.6mm) swap to Sky Blue

At layer #21 (1.76mm) swap to White for the rest.

You can find the details in the documentation.

If you don't have a multicolor printer, you can find a guide to color printing using manual filament change in the PDF file.

If you like my uploaded model, please take a look at my other works!