Zoro - LED Lightbox - Printing Instructions Included

All the necessary printing instructions are included in the file.
If you have any questions, feel free to DM me!

You will need a 1mm thick glass layer or any transparent material of your choice.
Also, make sure to have a strip light of your choice for the lighting.

For Commercial Use & More : https://www.patreon.com/c/ACSPARK3D

Enjoy showcasing your Zoro ! - LED Lightbox

LightBox Frame Settings:
Layer Height: 0.2
Walls: 2
Bottom: 2 (Or 3 to hide infil lines)
Top: 2
15% Infil

LightBox Back Plate Settigns:
Layer Height: 0.2
Walls: 2
Bottom: 3
Top: 3
10% Infil

LightBox Transparent Layer:
Layer Height: 0.2
Walls: 2
Bottom: 2
Top: 2
1% Infil

Design Layer Settings:
Layer Height: 0.2
2 Walls
2 Top/Bottom
3% Infil
No supports.