✨IF YOU LIKE MY MODELS FOLLOW ME AND SHARE✨

Project: evileye.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
    PLA Elegoo Black Transmission Distance: 0.6
    PLA Elegoo Purple Transmission Distance: 5
    PLA SmartMaterials Pink Transmission Distance: 6.2
    PLA Elegoo White Transmission Distance: 9.6
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #8 (0.8mm) swap to Purple
    At layer #16 (1.44mm) swap to Pink
    At layer #18 (1.6mm) swap to White for the rest.

Note: for your Perphet alignment with other images in honeycomb mode download the guide

https://www.nexprint.com/en/models/ G0471687?printConfigId = G0369851

Every impulse helps me to continue creating new designs. I appreciate your support so much!

Don't forget to like it and save it so you can find it easily later!