A detailed 3D-printed model of Mewtwo in its embryonic form, inspired by its origin as a genetically engineered Pokémon. Designed to appear suspended in stasis, this piece captures the delicate and mysterious early stage of one of the most iconic psychic creatures.

Perfect for collectors, fans of Pokémon lore, or anyone looking for a unique sci-fi display. If not used a s a lamp, it still looks great inside a capsule, glass dome, or as part of a lab-themed diorama.

Boost Me (for free)

SPECIAL NOTE!!!!!
 

Try not to use the Super Tack plate, taking the print off may damage the strings. Most models with strings only use a single 0.24 layer high string, I use two. That way, if one fails, the other usually does not. There are other variations on the way, such as AMS painted, strings different color and support for the lamp and waterproof pucks. 

To light it you will need the standard 3AAA RGBW pucks, either from Aliexpress or bambu lab. 

Here is a link from a seller I used before, you get 3 pucks for a euro

Relatively simple, assemble the two halves using an assembly jig in the profile, it is basically two rings that will fit exactly to the two halves, just make sure you put a paper down so the glue doesn't leak and ruin your table (ask me how I know). There are nubs in the provided bases and it will keep it in place for a desktop stand, but carrying it around without gluing it, is not advised… if you are happy with it and do not wish to reuse the base for my other models, go ahead and glue it.


Also, DO NOT change layer size because then the mid air strings may fail.  Any issues, let me know.