hueforge
- 0.2mm layer, 2 walls, 15% infill
1-disc
PLA
Designer
24
8
Hueforge of a Bansky famous paint.
Have a nice print!!
_______________________________________
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
PLA PolyTerra Cotton White Distance: 0.3
PLA PolyTerra Sakura Pink Distance: 5
PLA PolyTerra Charcoal Black Distance: 1
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to White
At layer #8 (0.72mm) swap to Pink
At layer #11 (0.96mm) swap to White for the rest.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(1)
- bansky_Monkey_200x282.3mfDesigner
31.41 MB
2025-06-23
