elegoo
Neptune
Linear rails
Neptune 4 Base/Pro
- 0.2mm layer, 4 walls, 98% infill
1-disc
PETG
Designer - 0.2mm layer, 7 walls, 30% infill
1-disc
PETG
Designer
452
19
Testing for Y axis rails for Neptune 4 Base/Pro. Thanks to @MLopez on the elegoo discord server for sacrificing his time and printer.
Pros
Higher rigidity
Lower Maintenance
Cons
3.6mm of loss in the Z direction
Requires a lot of work to install
If you can print ABS or ASA with good layer strenght i'd reccomend using those materials. If there is even a hint of weak layer bonding stick to PETG
This is still very work in progress, if you have any issues you can ask for help on the discord post
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Models(2)
- Spacer.3mfDesigner
336.24 KB
2025-06-05
- Double carriage.3mfDesigner
74.51 KB
2025-06-05
