Wrapped in Color
guitar
guitar knob
- 0.2mm nozzle 0.1mm layer, 4 walls, 15% infill
7-disc
PLA
Designer
23
3
I made some custom guitar knobs for myself, figured I'd share them.
These are multicolour, printed with a 0.2mm nozzle. Results with a 0.4mm nozzle will not turn out well.
Both longer and shorter styles are available, the insides are scaled to push fit a 6mm diameter split knob.
The STLs have the components split, just right click in your slicer and choose 'split to parts' if you want to open them outside of the print profile.
Includes knobs for:
- 2 pickup 2 volume guitar configs
- basic volume knob
- tone
- mix
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(15)
Guitar Knobs Bridge Pickup Short.stlDesigner
580.84 KB
2026-02-13
Guitar Knobs Bridge Pickup.stlDesigner737.00 KB
2026-02-13
Guitar Knobs Mix 2 Short.stlDesigner557.80 KB
2026-02-13
Guitar Knobs Mix 2.stlDesigner713.95 KB
2026-02-13
Guitar Knobs Mix Short.stlDesigner646.08 KB
2026-02-13
Guitar Knobs Mix.stlDesigner802.23 KB
2026-02-13
Guitar Knobs Neck Pickup Short.stlDesigner580.45 KB
2026-02-13
Guitar Knobs Neck Pickup.stlDesigner736.61 KB
2026-02-13
- Guitar Knobs Print Profile.3mfDesigner
2.26 MB
2026-02-13
Guitar Knobs Tone 2 Short.stlDesigner607.21 KB
2026-02-13
Guitar Knobs Tone 2.stlDesigner763.36 KB
2026-02-13
Guitar Knobs Tone Short.stlDesigner616.98 KB
2026-02-13
Guitar Knobs Tone.stlDesigner773.13 KB
2026-02-13
Guitar Knobs Volume Short.stlDesigner664.44 KB
2026-02-13
Guitar Knobs Volume.stlDesigner820.59 KB
2026-02-13
View all(15)
