Hanami from JJK
 

I only used 4 colors to make it easily compatible with an AMS/MMU but it can easily be printed be manualy performing 5 color swaps
 

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 131.01x200mm in size

You may print at higher layer heights below the Base Thickness of 0.32mm
The Max allowed Thickness is 2.08mm and the Actual Thickness is 1.92mm

    #000000 PLA+ Elegoo Black  Transmission Distance: 0.8
    #ffffff PLA+ Elegoo White  Transmission Distance: 5.4
    #b80000 PLA+ Elegoo Red  Transmission Distance: 6
    #ffff00 PLA+ Elegoo Yellow  Transmission Distance: 4
This print uses 4 unique filaments

Swap Instructions:
    Start with Black
    At layer #6 (0.56mm) swap to White
    At layer #7 (0.64mm) swap to Red
    At layer #15 (1.28mm) swap to Yellow
    At layer #17 (1.44mm) swap to White

Border Only Colors from here until the end.
    At layer #23 (1.92mm) swap to Black for the rest.