Play with Your Kids
figure
3d
animation
invincible
battle beast
- 0.16mm layer, 3 walls, 12% infill
1-disc
PLA
Designer
2
0
Battle Beast (Invincible) - Full Color 3D Print
Bring the legendary, galaxy-hopping warrior Battle Beast to your shelf with this highly detailed, multi-color model! This print captures his imposing physical presence, complete with his signature mane, armor, and battle-ready stance.
Optimized for multi-color printing, this model is sliced to minimize waste while retaining striking contrast between his armor, fur, and golden accents.
📊 Print Specifications & Settings
As seen in the slicing preview from Screenshot 2026-05-31 at 17.08.59.jpg, this model has been fully optimized using multi-nozzle/filament grouping to save material and time.
- Total Print Time: ~14 hours 51 minutes
- Filament Weight: ~242.01 g (approx. 79.86 meters)
- Material: PLA
- Supports: Minimal/custom tree supports recommended for the arms and chin.
🎨 Filament / Color Mapping
To achieve the exact look shown in Screenshot 2026-05-31 at 17.08.59.jpg, load your AMS or multi-tool setup with the following PLA colors:
| Slot / Tool | Suggested Color | Model Element |
|---|---|---|
| Slot 1 | Grey / Silver | Mane, face, feet, and metallic armor details |
| Slot 2 | Crimson Red | Primary armor plates and bracers |
| Slot 3 | Black / Dark Charcoal | Under-suit and body shadows |
| Slot 4 | Gold / Yellow | Belt, kilt trimmings, and accent armor |
💡 Print Note: The slicing configuration shown in the preview successfully saves 179g of filament and eliminates 394 filament changes compared to a standard single-nozzle AMS setup by utilizing smart filament grouping.
🛠️ Recommended Print Settings
- Layer Height: 0.16mm or 0.2mm for an optimal balance of detail on the mane.
- Infill: 10% - 15% (Gyroid recommended for strength).
- Wall Loops: 2-3 walls are sufficient.
- Bed Adhesion: A brim is highly recommended due to the slim contact points at the feet and the height of the purge tower.
If you enjoy this model, please leave a ⭐⭐⭐⭐⭐ review and upload your makes! I'd love to see how your Battle Beast turns out.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Models(1)
- battle beast full colour AMS.3mfDesigner
5.60 MB
2026-06-03
