EN: This is a speculated Starship HLS (Human Landing System) model. I mainly referenced images of the latest drawings from the SpaceX website and made modifications for better 3D printability. If you print it using my print profiles, the model is about 25.5 to 26.5 cm (~10 to 10.4 in) tall and takes as little as 4.5 hours to print (Regular No Canvas). It is compatible with my Super Heavy booster model and OLM model that I released earlier. Glue is needed during assembly. Please make sure you test-fit all the parts before you apply any glue. You can sand the edges of some parts down, if the added tolerance is not sufficient for your machines.

ZH：这是一个推测的星舰HLS（载人着陆系统）模型。我主要参考了SpaceX官网上最新设计图的图片，并进行了修改，以提高3D打印的可行性。如果使用我的打印配置文件进行打印，模型的高度约为25.5到26.5 cm，打印时间最短仅需4.5小时（普通打印，无Canvas）。该模型完美兼容我的超重助推器模型和OLM模型。拼装时需要使用胶水。在涂胶之前，请务必先假组一遍。想要粘接面更干净可以事先用砂纸打磨一下。

EN: There are 2 editions: regular edition and exploratory edition.

The regular edition has no interior structures but has 3 different configurations. Changing the configuration is very simple.

1) Solar panels are hidden during take-off

2) Solar panels placed vertically: simulate when sunlight is perpendicular to the Starship

3) Solar panels placed horizontally: simulate when sunlight is parallel to the Starship

ZH：这款模型有两个版本：普通版和探索版。

普通版不带内构但可以拼装成星舰的3种不同形态。修改形态也挺简单的。

1）太阳能板收缩在机舱内部：模拟发射时的状态

2）太阳能板垂直放置：模拟阳光垂直于机身的时候

3）太阳能板平行放置：模拟阳光平行于机身的时候

EN: The exploratory edition has some interior structures implemented. The interiors are based on very limited resources online and a group of rocket fans of mine's speculation. We had a few nice debates, such as on the number of solar panels the Starship HLS will carry and its window arrangements, before settling down to the current design. One of my friends who works at SpaceX told me that SpaceX may not have any plan on how the interiors will look yet, so please treat this model as a casual model instead of an accurate model.

ZH：探索版中包含了一些内部结构。这些内部设计基于网上极为有限的资源，以及我和一群火箭爱好者的推测。我们进行了几次很有趣的讨论，比如星舰HLS将携带多少块太阳能板，以及窗户的布局，并最终确定了目前的方案。一位在SpaceX工作的朋友告诉我，SpaceX可能尚未制定内部结构的具体方案，因此请将这个模型视为一个休闲模型，而非仿真模型。

EN: I uploaded 4 print profiles. Please thoroughly clean your build plate before printing, as some parts have a small bottom layer.

1）Regular Edition Canvas: No interior + colored solar panels & nameplate

2）Regular Edition No Canvas: No interior + uncolored solar panels & nameplate

3）Exploratory Edition Canvas: Colored interiors + colored nameplate

4）Exploratory Edition No Canvas: Uncolored interiors + uncolored nameplate

ZH：我上传了4个打印配置。打印前请先清理打印板，不然首层面积小的打印件可能会倒。

1）Regular Edition Canvas：无内构 + 多色铭牌

2）Regular Edition No Canvas：无内构 + 单色铭牌

3）Exploratory Edition Canvas: 带内构 + 多色星链模型 + 多色铭牌

4）Exploratory Edition No Canvas：带内构 + 单色星链模型 + 单色铭牌

EN: We (a group of rocket fans and I) hope you will enjoy this model. It took us a lot of time to do research and design.

ZH：我和我的火箭爱好者朋友们希望大家会喜欢这款模型。这玩意儿花了我们好长时间查阅资料和设计。