I wanted a sealed poop chute for my Centauri Carbon (and also one that didnt directly hook to the screws which keep getting loose that way), like i have with my P2S to better seal it for printing high temp materials and dampening fan noise. Found nothing like it, so i decided to make my own.

The holder is screwed in via the existing screws below and above the chute.

There is a Bambu and Orca 3mf, choose based on your printer.

There are quite a few combinations (especially for Bambu with AMS); three sizes, two models (one with a quirky addition and one without) and multicolor (AMS) or single color. Just choose the appropriate plate - everything you need is on each plate. I only made multicolor options for model B, and only one for model A (the large), since the purge and waste for model A is almost as much as the model itself, so do that one only if you really want it. Multicolor model B has a more acceptable ammount of waste (about 70g). Sadly the waste cannot be avoided without breaking the optimal print orientation which would be a bigger functional issue.

Besides the Elegoo branding there is OpenCentauri branding as a way to show support for the project.

PLA should be more than enough for this and should print nicely without any supports (models were designed with this in mind).