A calm, practical storage box with flowing wave-textured sides and a clean, open top. Designed for small everyday essentials on a shelf, desk or console.

Print one box or build a matching stack: the boxes sit directly on one another, with no lid needed between them. The locating foot helps align the stack while the top box remains open and accessible.

WHAT YOU GET
- Wave Box STL: 145 × 100 × 52 mm.
- Reusable Bambu Studio project, plus digitally checked reference-printer variants.
- Elegoo Centauri Carbon 2 projects: standard 0.20 mm and optional faster 0.28 mm.
- Optional smooth lid/tray STL and separate projects: 145 × 100 × 8 mm. This accessory is not required for stacking and has not been physically printed or fit-tested.

STACKING
The lower locating foot inserts 1.2 mm into the next box; the direct stacking pitch is 50.8 mm. The contact was checked digitally for interference. Real fit depends on your material, calibration and print tolerances. Test two boxes before printing a large set. The gallery shows three open boxes stacked directly, without intermediate lids.

PRINT SETTINGS
PLA or matte PLA • 0.4 mm nozzle • 0.20 mm layers • 2 walls • 5 top/bottom layers • 15% gyroid infill. Place the flat base on the build plate. Supports and AMS are not required; use the supplied standard profile for your first print. Choose and calibrate your actual filament in the slicer. The 0.28 mm CC2 box profile is an optional faster draft, not the profile represented by the simulated 0.20 mm surface in the renders.

BAMBU COMPATIBILITY
Digitally sliced on A1 mini, A1, P1S and X1 Carbon. Bambu projects are not limited to A1: select your own printer and 0.4 mm nozzle, select your filament, keep/transfer the process settings and reslice. No ready-to-run Bambu G-code is supplied. Each native project remembers a reference printer; that is not an automatic guarantee of every portal compatibility badge. Other Bambu printers need the correct preset, sufficient build area and a fresh slice. The box and optional lid fit the A1 mini build area.

VALIDATION AND GALLERY
The meshes and profiles have been checked digitally. No physical testing of these supplied profiles has been documented in this package. All gallery images and thumbnails are Blender renders of the printable STL geometry, not photos or proof of a successful print. Surface texture, colour and lighting are illustrative; your result depends on filament and settings. Add genuine photographs of your own prints before publishing a print profile. Single-colour prints are sufficient; a multicolour stack is made from separate prints.