2
2
A 1:18 scale model of a small dumper truck, with all parts fully movable—tilting dump bed, steerable and tilting rear axle, and swiveling wheels. It is printed in separate pieces without supports and requires no screws—only glue.
To ensure the rear axle tilts properly, apply glue only to the rear counterweight, not to the axle that connects it. Printed in PETG using a 0.4 mm nozzle and a layer height of 0.2 mm.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Models(9)
accesorios ausa d150.stlDesigner
1.02 MB
2026-06-28
ausa d150 rm neumaticos.stlDesigner2.37 MB
2026-06-28
ausa d150.stlDesigner4.61 MB
2026-06-28
chasis y accesorios ausa d150.stlDesigner720.20 KB
2026-06-28
eje delantero ausa d150.stlDesigner140.61 KB
2026-06-28
eje trasero ausa d150.stlDesigner287.97 KB
2026-06-28
llantas ausa d150.stlDesigner1.14 MB
2026-06-28
neumaticos ausa d150.stlDesigner1.23 MB
2026-06-28
tolva y pernos ausa d150.stlDesigner109.46 KB
2026-06-28
View all(9)
Attachments(7)
gcode
ECC2_0.4_ausa d150 rm neumaticos_Elegoo PETG _0.2_1h26m.gcode
4.78 MB
2026-06-28
gcode
ECC2_0.4_ausa d150_Elegoo PETG _0.2_38m34s.gcode
2.21 MB
2026-06-28
gcode
ECC2_0.4_ausa d150rm accesorios int_Elegoo PETG _0.2_3m22s.gcode
107.84 KB
2026-06-28
gcode
ECC2_0.4_ausa d150rm accesorios int_Elegoo PETG _0.2_12m36s.gcode
612.76 KB
2026-06-28
gcode
ECC2_0.4_ausa d150rm chasis y accesorios_Elegoo PETG _0.2_3h28m.gcode
8.32 MB
2026-06-28
gcode
ECC2_0.4_ausa d150rm tren delantero_Elegoo PETG _0.2_39m55s.gcode
2.04 MB
2026-06-28
gcode
ECC2_0.4_ausa d150rm tren trasero_Elegoo PETG _0.2_28m11s.gcode
2.09 MB
2026-06-28
View all(7)
