Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Bloodlust Axe – Dark Fantasy Cosplay 

Unleash the fury of darkness with Bloodlust, a massive fantasy double-bladed axe designed for cosplay, LARP, RPG adventures, and display collections. Featuring a ferocious demonic skull centerpiece, bat-like winged blades, gothic ornaments, and razor-sharp fantasy styling, this weapon is perfect for dark warriors, necromancers, demon hunters, and villain-inspired costumes.

The model is optimized for FDM 3D printing and includes necessary supports for reliable printing and excellent detail reproduction. The axe is divided into 2 separate parts for easier printing and assembly. After printing, simply glue the pieces together to create a striking full-size prop measuring approximately 390 mm (15.35 inches) in length.

Whether you're preparing for a convention, building a fantasy character, enhancing a tabletop RPG setup, or adding a dramatic piece to your collection, Bloodlust delivers an imposing and unforgettable presence.

Features

• Fantasy double-bladed axe design

• Detailed demonic skull centerpiece

• Gothic and dark fantasy aesthetic

• Optimized for FDM printing

• Supports included

• Split into 2 printable parts

• Easy post-print assembly with glue

• Finished prop length: 390 mm

• Perfect for cosplay, LARP, RPG props, conventions, displays, and photography

Recommended Printing Settings

• Layer Height: 0.20 mm

• Supports: Required

• Infill: 10–15%

• Material: PLA, PLA+, PETG, or similar

• Assembly: Glue the 2 printed parts together after printing

Bring chaos and destruction to your next adventure with Bloodlust – a fearsome fantasy axe worthy of the darkest champions.

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   

• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support