Backlit Wolverine HueForge 

(B&W) A simple, easy-to-print Wolverine portrait. 

Optimized for a white-on-black filament swap to create a bold, comic-book aesthetic.

if you need a lightbox check put my Changeable Litho Hueforge light box frame 15x10cm

https://www.nexprint.com/en/models/G4182315?component=UserPublish&printConfigId=G2444251

The Model is 100x150mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.19999mm

    #000000 PLA BambuLab Basic Black  Transmission Distance: 0.6
    #ffffff PLA BambuLab Basic Jade White  Transmission Distance: 5
This print uses 2 unique filaments

Swap Instructions:
    Start with BambuLab Basic Black
    At layer #8 (0.72mm) swap to BambuLab Basic Jade White for the rest.