- Layer height: 0.12 mm, wall thickness: 2 layers, infill density: 15%
1-disc
PLA
Designer
10
3
Tiangong Space Station – Intermediate Node Module – Assembly Version (Stay tuned for the other modules!)
The node module serves as the critical connection point, enabling seamless communication and interconnection among all station compartments.
With a tolerance of 0.1 mm, and subject to material shrinkage and printing accuracy, it’s recommended to lightly sand and apply adhesive where necessary, applying gentle pressure to ensure proper bonding.
Before printing, be sure to thoroughly clean the PEI print bed to ensure optimal adhesion and verify that the material is completely dry
The main body of the model stands approximately 38 mm tall, using 12 grams of PLA and taking 1 hour and 31 minutes to print.
PLA, with a layer height of 0.12 mm, 2-wall infill, and acceleration set no higher than 1000 mm/s² across all axes.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(1)
- 中间节点仓.3mfDesigner
346.34 KB
2025-10-06
