Summary
This is a 1:24 scale model of lockers in a kit card style.

Versions
The kit card is available in a 3MF file for a one-color print.
The individual lockers are available as separate files.

Print
Print with 0.16 layer hight or lower to bring up the details.
No supports are needed.
Use 3 perimeters and 10% infill.

Post processing
The small struts can be removed really quickly and cleanly using a side cutter.

Dimensions at 100% scale (1:24)
The fully assembled model has the following dimensions
Height: 75mm
Depth: 17.6mm
Width: 16.6mm (single) - 31.1mm (double)

The kit card has the following dimensions when printed
Height: 17.6mm
Depth: 85mm
Width: 82mm

Scaling is possible completely and without any limitations.
Calculation formula using the example of target scale 1:18:
24 / [18] * 100 = 133% scale in your slicer

Other models
I will also try to publish other car related garage / diorama models. Stay tuned!

I hope you had as much fun printing and assembling it as I did :-)

Do you like my work? I would be very happy if you would support my work on Ko-fi.