Clockwork Muse – Steampunk 3D Printed Bookmark

Step into the gears and cogs of imagination with the Clockwork Muse Bookmark.
This steampunk-inspired design features a striking muse dressed in elegant Victorian attire, captured in shades of bronze, latte, and ivory. Her presence evokes mystery and creativity, making it the perfect companion for readers who love fantasy, steampunk tales, and classic adventures.

Whether you're reading under candlelight or with the hum of machinery in the background, this bookmark adds a touch of mechanical magic to your story.

🖨️ Print Details

• Size: 42 × 145mm
• Infill: 100%
• Layer Height: 0.08mm (base layer 0.16mm)
• Max Thickness: 2.08mm
• Actual Thickness: 2.08mm

🎨 Filaments Used

• PLA Sunlu Black – Transmission Distance: 0.1
• PLA Sunlu Orange – Transmission Distance: 6.2
• PLA Sunlu Latte – Transmission Distance: 2.5
• PLA Bambu Jade White – Transmission Distance: 5.7

Total Colors: 4 unique filaments

🧵 Manual Color Change Instructions – No AMS Needed

This model uses 4 colors and is fully printable on any single-extruder printer without an AMS or multi-material system.

The file includes pre-set pause points, so your printer will stop at the correct layers and prompt you to swap filaments manually.

1. Start with Black
2. At layer #11 (0.96mm), swap to Orange
3. At layer #16 (1.36mm), swap to Latte
4. At layer #19 (1.6mm), swap to Jade White for the rest

✅ The printer will resume automatically after each swap.
📌 Note: Pauses are set based on slicing at 0.08mm layer height. If slicing differently, adjust swap layers accordingly.