Pacman, with 1 filament changes

With 1 filament changes for a total of 2 different colors

This print must to be slice with "Initial Layer Height" and "Layer Height" = 0.20 mm (unless there is a change in scale)

Except change of scale and/or layer height befor slicing.
You need to add 1 "filament change" (g-code "M600") or "pause" (g-code "M0") depending on your printer/firmware to change filament. A change of filament every two layers.

Start with : Yellow filament until Z0.40
Switch to : Black filament until Z0.80, the end of the print.

Filaments used "PLA Yellow Polymaker", "PLA Recyclé ArianePlast".

Credits :

- "Pixel Art Image" extracted from image found on "https://www.anyrgb.com/en-clipart-ggwlw"

Happy printing.