A detailed, 3D-printed dragon skull sits on a surface, its intricate horns and teeth clearly visible.

Here is a detailed spec sheet for the 3D-printed dragon skull.

3D-Printed Dragon Skull: Technical Data Sheet

General Information

• Model Name: Draconic Skull
• Version: 1.0
• Designer: [Specify a designer if known, e.g., "Generic STL" or a fictitious name like "Artificer Labs"]
• Classification: Decorative Art / Hobbyist Model
• Material: PLA (Polylactic Acid)

Printing Parameters

• Printer Type: Fused Deposition Modeling (FDM)
• Printer Model: [Could be a common model, e.g., "Creality Ender 3 V2" or a fictitious one like "Aetherworks 5000"]
• Slicer Software: [e.g., "Cura" or "PrusaSlicer"]
• Nozzle Diameter: 0.4 mm
• Layer Height: 0.12 mm (Fine Detail)
• Infill: 10% (Grid Pattern)
• Print Speed: 50 mm/s
• Supports: Required (Tree Supports recommended for horns and lower jaw)
• Raft/Brim: Brim
• Build Plate Adhesion: Adhesion Spray or Glue Stick

Physical Specifications

• Dimensions:
  • Length: 150 mm
  • Width: 75 mm
  • Height: 60 mm
• Approximate Print Time: 10-12 hours
• Estimated Filament Usage: ~50 grams
• Color: Opaque White
• Surface Finish: Matte, with visible layer lines typical of FDM printing.
• Weight: ~45 grams

Detailed Features

• Skull: The main cranium features detailed bone texture, eye sockets, and a nasal cavity. A central ridge runs along the top of the skull.
• Horns: Two large, curved horns extend backward from the top of the skull, tapering to sharp points. They are hollowed out to reduce print time and material usage.
• Jaw: The lower jaw is an integral part of the print, showcasing a full set of sharp, predatory teeth. The jawline is finely articulated with a prominent chin bone.
• Post-Processing: Minimal post-processing is required. Supports must be carefully removed. No sanding or painting has been applied to the model shown.

Usage & Care

• Intended Use: Desk ornament, display piece, or prop for role-playing games.
• Care Instructions:
  • Keep away from direct sunlight or high heat to prevent warping.
  • Clean with a soft, dry cloth.
  • Avoid dropping the model, as PLA can be brittle.