3.5” Hard Drive Enclosure | A Symbiotic Blend of Desktop Elegance and Storage Power

— Transforming Your Data Bay into a Hub of Creative Inspiration

“Minimalist Industrial Design, Perfect for Any Desk Setup”
▸ Geometric Cutout Design → Say Goodbye to Bulky, Plastic‑Like Aesthetics
▸ Dual Form Factor: Vertical or Horizontal — Seamlessly Adapts to Monitors, Bookshelves, and a Variety of Other Settings

“Rugged Interior, Silent Guardianship”
✓ Hollowed-Out Heat Dissipation for Cool, Stable Performance
✓ Fully Compatible with All 3.5” Hard Drives → Turn Old Disks into a Personal Cloud Storage Base in an Instant

"It’s not just a storage device;
it’s your silent cyber‑companion on the desk—
capturing bursts of inspiration, archiving your creative journey,
and using the sharp edges of technology to define your very own aesthetic of productivity."

I. Materials Needed:

1. M3×8 Countersunk Screws (for Securing the Bracket and the Seagate Backup Plus Hub Motherboard)

2. M3×4×4.2 Copper Nuts (for Fixing the Bracket and the Seagate Backup Plus Hub Motherboard)

3. M2×8 Self‑Tapping Screws (for Attaching the Rear Cover)

4. Seagate Backup Plus Hub Motherboard

5. M2.5×6 Screws (for Mounting the Hard Drive)

II. Installation Notes:

1. Orientation of Copper Nuts

The 5 copper nuts securing the bracket must be hot‑melted into the bracket from this direction.

The 2 hot‑melt nuts securing the Seagate Backup Plus Hub motherboard must be installed into the bracket from this direction.

2. Hard Drive Mounting: Simply use 1–2 M2.5 screws to secure the hard drive.