Keep your drink cool.

Hide your can content.

Increase the grip and avoid your precious drink sliding out of your hand.

No more contact with cold and wet can!

Suspicious looking can? NOT A BEER Mr. Officer! :)

Sleek design, it will not make your can looks bulky - only 3 walls model.

Great for parties, barbecues, festivals, beach and other places! :)
 

How to print the model?
Model was created with 0.2mm layer height and 0.4mm nozzle in mind. Don’t go with bigger nozzles or higher layers. You will loose details and potentially make this sleeve too tight for a can.
Print it with PETG for high temperature resistance if you want to use it outside. PLA is absolutely fine too… just change your cans often to provide some cooling ;)
 

Option 1 – Fast print, no colors
Download model described as above. It has only outside face.In slicer go to „Strength” tab. Set „wall loops” to 3. It has to be 3 to get correct dimension for the can. Set „top shell layers” to ZERO. Set „bottom shell layers” to 8 or 10 (to get 1.6 or 2.0 mm bottom part of the sleeve). Set the „sparse infill density” to ZERO. This way only thing printed will be bottom and 3 walls. Fast and easy :)
 

Option 2 – You got plenty of time, unlimited access to free filament and you are little bit crazy ;)
ACE / AMS / CFS with coloring option!
Download „For AMS coloring” file. This is full model with outside and inside face. Currently Bambu Studio is not able to color model prepared as in Option 1.
Color your model as you want. There can be hundreds combinations!!!
Be shocked by the printing time. Be shocked by the filament wasted. Be shocked by amount of filament changes.
You don’t want to do this!!! :)
 

OK, now I’m waiting for some „Hold my beer” guy….. :D
 

Gents and Ladies! If you like the model and you want to give it thumbs up, please also consider downloading it. It cost you just one additional click and it’s very important to me. Thank you!
 

Thats it!

As always – happy printing :)