Modular Spinning Tool Caddy (Tabletop & Grooming Pole Versions)

Keep your workspace organized and your most-used tools within arm's reach! This Modular Spinning Tool Caddy features a smooth-spinning Lazy Susan base designed to save you time and hassle during a busy workday.

Perfect for pet groomers, barbers, stylists, or crafters who need quick, 360° access to their gear.

🌟 Key Features

100% Modular Design: Features a central tower with 5 interchangeable, slide-in sections. Arrange them however you like, or swap them out down the line!
Dual-Base Versatility: Includes files for two completely different setups depending on your workspace (see Base Options below).
Compact Footprint: With a total diameter of 240mm (9.45"), it maximizes your storage without crowding your station.
Easy Swapping: Switching between the tabletop and pole-mount configurations is as simple as removing a few screws from the hardware base.

🛠️ Included Modular Inserts

Scissors & Comb Holder: Keeps your shears and combs perfectly upright (holds up to 7 scissors and 3 combs).
Blade Holder: Safely organizes up to 5 large or standard-sized clipper blades.
Round Holder: Ideal for brushes, trimmers, or nail clippers.
Cotton Pad Holder: Great for cotton pads and swabs, or use it as a convenient short tray.
Empty Tray: Open, general storage for larger miscellaneous items.

📐 Dual Base Options Included

Option A: Tabletop Base – Standard flat feet for any flat desk, counter, or workstation.
Option B: Grooming Pole Base – Specifically designed to mount directly onto a 20mm x 20mm square grooming arm/pole.

🔩 Required Hardware & Assembly Guide

This model prints beautifully in standard PLA.

Required Hardware:

Lazy Susan Hardware: 1x Metal Lazy Susan turntable (Dimensions: 145mm inner diameter / 200mm outer diameter).
- Hardware Link: Temu Turnable Base
Screws: 8x M4 screws (for the Lazy Susan mount) & 4x M1 screws (to secure the center tower).

Assembly Steps:

1.Mount the Top Plate:M4 Screws.

Screw the top round plate of the caddy to the top side of the metal Lazy Susan using 4x M4 screws.

2.Attach the Center Tower:M1 Screws.

Secure the middle tower to the top plate using 4x M1 screws. Once the tower is secure, you can slide your 5 chosen modular tool inserts into the side tracks. (Optional: You can use extra M1 screws to lock the inserts firmly into the tracks, but it is not strictly necessary).

3.Mount the Bottom Base:M4 Screws.

Flip the assembly over and attach your chosen base (Tabletop or Pole version) to the bottom side of the metal Lazy Susan using the remaining 4x M4 screws.

4.Locking the Pole Version (If using the Grooming Base):Glue & Nuts.

If you are using the grooming pole base, glue the printed square collar (the one with 4 holes) onto the base. This square has internal recesses to hold nuts. Drop the nuts inside, slide the caddy onto your 20mm grooming pole, and tighten the screws from the outside to securely lock it in place.

🖨️ Recommended Print Settings

Material: PLA works perfectly
Supports: Minimal/None required depending on your printer's bridging capabilities for the slots.
Infill: 15-20% Gyroid for a great balance of strength and print time.

If you love the model or have any feedback, please leave a comment, upload your makes, and give it a rating!