So this is the rubber band gun, Wolf 01, originaly designed by Ugears. I was curious if i can scan parts and print it. It works, not as smooth but I'm still surprised.

Print with your standard settings. It is still in progress, since I got some issues with occasional jamming (especially when firing fast). Also some minor dimension adjustments are required

You will need:

100mm rubber bands (66mm in diameter)
1 piece of every part except these:

part 3_8 = 2x
part 5 and part 4 = 4x
part 15 = 2x
part 17 and 18 = 2x
part 24 = 2x
part 25 = 8x
part 26 = 2x