gridfinity
Gridfinity Baseplate with Magnet & Screw Together
Print Profile(6)
- 4x4 - 0.2mm layer, 2 walls, 15% infill
1-disc
PLA
Designer 
3x3 - 0.2mm layer, 2 walls, 15% infill1-disc
PLA
Designer
2x4 - 0.2mm layer, 2 walls, 15% infill1-disc
PLA
Designer
2x3 - 0.2mm layer, 2 walls, 15% infill1-disc
PLA
Designer
2x2 - 0.2mm layer, 2 walls, 15% infill1-disc
PLA
Designer
1x1 - 0.2mm layer, 2 walls, 15% infill1-disc
PLA
Designer
2
0
Released 2026-06-08
Gridfinity baseplates with standard 6x2mm magnet holes in each corner.
You can screw multiple baseplates together using the holes on the sides and standard m3 nuts and bolts.
The empty center saves you filament and reduces the print time without sacrificing durability or strength
Originality of the Model
The author declares that this work is their personally remixed model
Adaptation source:https://www.printables.com/model/630057-gridfinity-extended-openscad
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(6)
- Baseplate+1x1.3mfDesigner
479.91 KB
2026-06-04
- Baseplate+2x2.3mfDesigner
562.44 KB
2026-06-04
- Baseplate+2x3.3mfDesigner
610.12 KB
2026-06-04
- Baseplate+2x4.3mfDesigner
651.67 KB
2026-06-04
- Baseplate+3x3.3mfDesigner
679.62 KB
2026-06-04
- Baseplate+4x4.3mfDesigner
830.79 KB
2026-06-04
View all(6)
No more
