“Lie Ma II” is an upgraded experimental version of the original “Lie Ma” race car. It retains some of its exterior design while undergoing extensive modifications: the front wheels have been replaced with four smaller wheels fitted with slick tires to enhance track grip; the single rear jet has been replaced by a dual external jet configuration; and the weapon system has been removed. Additionally, the front air scoop has been redesigned into a more aggressive structure.

Model dimensions: 204 x 129 x 57 mm.

Notes:

• The decals on the main body are water-slide decals—please purchase them separately.

• Headlights can be colored according to personal preference; by default, they remain uncolored to save materials.

• Assembly requires glue—502 adhesive is recommended; follow the assembly instructions provided.

• Tires and axles do not require glue. When installing, align them with the protrusions inside the chassis and press straight down (note that different filament shrinkage rates may cause slight variations in hole sizes, resulting in a bit of tightness).

• Before printing, thoroughly clean the print bed and ensure filaments are properly dried.

• By default, the axle does not include a brim. If adhesion issues arise, you can add one later via your slicing software: under the process settings, select the axle object, then go to "Other" → "Hotbed Adhesion" → choose "Brim Type" → set it to "Outer Only").