hook
sturdy
hanging
Baby table
Elegoo Centauri Carbon, PLA, 0.2mm layer, 3 walls, 5% infill
2-disc
PLA
Designer
Elegoo Centauri Carbon, PLA, 0.2mm layer, 3 walls, 5% infill2-disc
PLA
Designer
9
3
Sturdy hooks originally designed to hook baby gear on the side of our baby changing table.
Can however be used on any piece of furniture with a 16mm thick wall.
Different designs:
- Rectangular hook
- Sloped hook
Two options for each:
- tight fit (to ensure the hook stays in place)
- loose fit (to allow the hook to be freely slided on the rail)
If you want me to upload model for other thickness or other sizes, offer me a coffe, and I will gladly adapt the model to your specific needs.
☕ Enjoying the design?
If you found this design helpful and would like to support my work, feel free to buy me a coffee!
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(2)
- Baby table hook_16mm.3mfDesigner
46.15 KB
2026-05-21
- Baby table slopped hook_16mm.3mfDesigner
49.43 KB
2026-05-21
