Toast model with top and bottom that can be printed in another color with the edges slightly off to preserve crust edge

The original model would look completely one color when viewed straight on. Thus, I modified the original design so that the bottom and top can be printed in another color while preserving the edge/crust color when looking directly at the front.  The color/filament swaps use a different height so that you do not need an MMU or AMS but can do a simple filament swap. The top and bottom edges are 0.4mm in height.

Print in 0.2mm layers with color/filament swaps at 0.6mm (layer 3) and 9.8mm (layer 49). You can do this with a manual filament swap, or an AMS/MMU for those of you have one.