🎄 A Very Merry Make
christmas
gingerbread
gingerbread house
christmas decor
snap fit
multicolor
holiday decor
candy cane
christmas village
no glue
festive
home decor
assembly kit
decorative
colorful
classic
holiday
makeyourself
xmas
winter

1.8k
57
Classic Christmas Gingerbread House 🍬
I wanted to make a 3D-printed gingerbread house that looks like it came straight out of a Christmas kitchen. It has thick white icing along the roof, red-and-white candy cane trim, and colorful little gumdrops. My favorite detail is the peppermint swirl on the front door, just above the frosted steps.
The house prints in seven separate pieces. The four walls slot into the decorated base, and the two roof panels go on top. Putting it together is part of the fun, just like building a traditional gingerbread house. No glue and no painting needed.
Two print profiles are included so you can choose between a 4-color version and a 5-color version. The house in the photos is the 5-color version, printed in gingerbread brown, icing white, red, dark green, and soft pink. In the 4-color version the pink candies are red and green.
Display it on a mantel, tuck it into a Christmas village, or bring it out every year as part of your holiday decorations.
What is included
- Plate 1: both roof halves, one with the chimney
- Plate 2: front gable with the door, and the side wall with 1 window
- Plate 3: back gable, and the side wall with 2 windows
- Plate 4: the base
- Assembly guide (PDF): 8 pages with pictures of every step
Assembly
- Press the front gable (door) straight down into the base until its 3 legs click.
- Do the same with the back gable.
- Slide the left wall (1 window) down between the gables. Its small keys go into the grooves in the gables, and its 2 legs click into the base.
- Do the same with the right wall (2 windows).
- Put the chimney roof on at a right angle to the roof slope, not straight down, so its holes go over the 4 pegs.
- Put the plain roof on the same way. Slide it in under the icing edge of the chimney roof at the ridge.
Printing tips
- Remove the supports carefully, especially near the snap legs.
- Trim any elephant foot from the snap legs and roof pegs so they fit without force.
- Try the front gable in the base first. If it snaps in well, the rest will too.
- A gap of about 1 mm under the roof at the front gable is normal.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(2)
Gingerbread House 4 colors.3mfDesigner62.81 MB
2026-11-10
Gingerbread House 5 colors.3mfDesigner62.83 MB
2026-11-10

















