Let’s take a look at what it feels like to be a diver this time!

This is one of the figures from the original IP character series “Wangwang,” featuring a cute style, fully detachable parts, movable eyeballs and head, and a finely finished surface.

1. Assembly instructions: Use quick-drying glue to attach each component.

   1. The mating holes between parts should fit snugly—make sure not to glue them in the wrong place.
   2. The eyes are printed separately with white sclera and black pupils; simply glue them into place.
      1. The face was printed using a layer height of 0.12 mm. After printing, insert the pupil and rotate smoothly, then attach the hair and secure it to the head.
   3. The body and head are connected via simple pins, with modifiers added to reinforce the joints during assembly.
2. The eyebrows and eyelashes are raised in relief; lightly paint them with black or brown acrylic paint. For blush, apply a small dot of pink acrylic, then use a cotton swab dipped in a bit of water to blend it softly.
3. This design is optimized specifically for FDM 3D printing, striving for exquisite detail from every angle while minimizing surface imperfections. Feel free to customize colors and adjust print sizes—go ahead and print your own figure! Please leave a comment with your suggestions.