Guile Stage: Air Force Base (Street Fighter II) - Ultimate Edition

Recreate one of the most iconic stages in fighting game history with this complete 3D Diorama Kit. Specifically designed to display the figures from the Street Fighter II Ultimate Edition collection.

PROFILE 1: F-16 JET & BASE (Standard / 4 colors)

* Plate 01: Tolerance Test. Print this first to verify your printer's accuracy.
  * The Design: All slots have a 0.25 mm offset relative to the tabs.
  * How to read it: If the piece fits perfectly in the second slot, your settings are ideal (Adjustment 0).
  * Adjustments: If it doesn't fit or is too loose, adjust the "X-Y Hole Compensation" on Plate 02 (MAIN BASE).
     * + 0.05: Makes the holes larger.
     * - 0.05: Makes the holes smaller.
  * Tip: If the fit becomes loose over time, a small piece of cardstock behind the tab will fix it perfectly.
* Plate 02: Main Base. Textured floor with slots for characters.
* Plate 03: F-16 Jet. Complete assembly on a single plate.
* Plate 04: Street Fighter II Logo. Needs to be glued.
* Note: This profile focuses on the 3D structures (Jet + Base). It does not include the multicolor sky background.

PROFILE 2: SPECTATORS PACK (4 colors / Assembly Required)
This pack includes the iconic background characters sitting on crates and cheering.

* Plates 01-03: Left Group. Contains the couple and the metallic crate structure.
* Plates 04-05: Center & Right Groups. The cheering soldiers and the couple on the right.
* Plate 06: Metal Crate. An extra accessory for the scene.
* Assembly: This is a Multilayer Kit. Clothes are printed separately from the bodies. You must GLUE the clothes onto the bodies to achieve full color detail.
* ⚠️ IMPORTANT: Color results will vary depending on the filament used, as gradient techniques are applied to the models.

PROFILE 3: STAGE BACKGROUND (4 colors)
This profile provides a functional background optimized for a single-process 4-color print.

* Plate 01: Sky & HUD (Base Board): The main functional sky background.
* Plate 02: HUD Details: Contains the scoreboard numbers, interface elements, and the interchangeable names for Guile and Ken, which must be GLUED onto the base.
* Plate 03: Forest Layer (Optional): An optional extra layer to add more depth to your diorama.

TIP: For the Character Names on Plate 02, I recommend using double-sided tape or a temporary adhesive instead of permanent glue. This way, you can easily swap the names in the future as you add new fighters to your collection!

RECOMMENDED SETTINGS

* Layer Height: 0.2 mm
* Line Width (1st Layer): 0.5 mm
* Bottom Layers: 3
* Infill: 15%
* Wall Generator: Arachne (Mandatory for clear HUD text and small details).

Filaments Used: I used the Smartfill Recycled range from Smart Materials for all structural and decorative parts to ensure color consistency throughout the entire collection.

I hope you like it and enjoy the model!