Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Loona Helluva Boss Chibi Bust Hellhound

Cute, sassy, and unmistakably Loona! This Chibi Loona Bust brings the beloved hellhound from Helluva Boss into an adorable collectible format while preserving her signature attitude and unmistakable style. Featuring oversized chibi proportions, expressive eyes, detailed fur, flowing hair, and an ornate crescent moon display, this bust perfectly balances charm and gothic elegance.

Standing 144 mm tall, the model is designed for FDM printing and includes supports for reliable results. The decorative moon frame, detailed hair strands, and layered ornamental elements create an eye-catching display piece that looks fantastic both unpainted and fully painted.

Most supports can be removed easily after printing. As with any highly detailed character model, extra attention is recommended around small features such as fingers, hair tips, and decorative ornaments to achieve the cleanest finish.

Whether you're a dedicated Helluva Boss fan, a collector of chibi characters, or simply looking for a unique display piece, this Loona bust is ready to bring a little bit of Hell's finest attitude to your collection.

Printing Notes

• Height: 144 mm

• Includes supported version

• Optimized for FDM printing

• Most supports remove easily

• Take extra care around delicate details

• Great for painting and display

• Decorative crescent moon themed base

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   

• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support