This model is based on this’s model :https://www.printables.com/model/23859-design-moon-lamp

Key Features:

Moon Lamp: Designed for a standard E27 lamp socket, the moon is printed with a and a to ensure a smooth, solid structure. It requires and takes approximately to print.

Adapter: The adapter secures the moon lamp to the socket and is printed with a , featuring and a for added strength. It too is printed .

The base boasts an , including the top, giving it a distinctive, organic appearance. Settings used:

• Fluffy Surface: All walls

• Spacing of Fluffy Surface Points: 0.5

• Thickness of Fluffy Surface: 0.5

• Hilbert curve

• 1.7

Printing Settings:

• Material: PLA

• Layer Height: 0.2 mm (moon & base), 0.16 mm (adapter)

• Wall Perimeters: 2 (moon & base), 3 (adapter)

• Infill Rate: 100% (moon), 30% (adapter), 15% (base)

• Infill Pattern: Straight lines (moon), gyroid (adapter & base)

After printing, assembly is —just insert a standard (not included) into the adapter, then lock the adapter onto the moon’s base.