axolotl
knitted
glasseyes
8mm eyes 0.16mm layer, 3 walls, 8% infill
1-disc
PLA
Designer
6mm eyes 0.16mm layer, 3 walls, 8% infill1-disc
PLA
Designer
183
69
I added knitted texture to the surface of the print and made holes for 6mm and 8mm glass eyes.
I gave the big eyed Axolotl to my grandmother and asked her if she could improve the level of cuteness. So she knitted a new one for us! lol :)
The Big eyed Axolotl now knitted and compatible with 6mm and 8mm glass eyes. :)
This took me quite a few attempts until I got it to a point where it's now acceptable to me. Had to restart in the CAD software after every attempt. But I'm happy with it now.
Two variations provided. One for 6mm glass eyes and a bigger one for 8mm glass eyes. Files are named accordingly. I recommend printing the 8mm version.
No supports required. A brim shouldn't be required either. I printed it at 0.16mm layer height with 8% gyroid infill.
Happy printing :)
Feeling generous enough to buy me a coffee? Or join my membership to get 3 converted STLs per month. :) - https://buymeacoffee.com/B3ND
Affiliate links for glass eyes.
Aliexpress
https://s.click.aliexpress.com/e/_c3fHmdwH
Amazon
Filament used: Gradient ice cream.
My printer: Elegoo Centauri Carbon
Affiliate link - https://amzn.to/4qfU9Xj
Originality of the Model
The author declares that this work is their personally remixed model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(4)
knitted axolotl 8mm glass eyes.stlDesigner
34.82 MB
2026-05-25
- knitted axolotl 6mm glass eyes.stlDesigner
34.82 MB
2026-05-25
- knitted axolotl 8mm glass eyes.3mfDesigner
9.15 MB
2026-05-29
- knitted axolotl 6mm glass eyes.3mfDesigner
7.84 MB
2026-05-29
View all(4)
