Set of three decorative Easter eggs designed for 3D printing, each featuring a different level of surface detail and cut-through pattern. Perfect for seasonal decorations, table display, or Easter baskets.

Variants:

Version 1 (solid, 1 mm embossed pattern) – raised surface pattern (~1 mm), no cutouts. Clean and classic look.

Version 2 (partially hollowed) – partially carved pattern allowing subtle light to pass through.

Version 3 (fully cut-through / hollow) – pattern goes through the entire wall, creating a lantern-like effect.

⚙️ Print Settings (General)

Printer: FDM 

Material: PLA (recommended), PETG optional

Layer height:

0.16 mm (recommended for detail)

0.12 mm (high detail)

Walls (perimeters):

2–3 walls

Top/Bottom:

3–4 layers (for solid version)

Infill:

0–10% (mostly decorative model)

Supports:

Auto/Manual for full cut version if bridging issues appear

Seam:

Back / aligned (to keep front clean)

Speed:

40–60 mm/s for best detail

Cooling:

100% fan after first layers (PLA)

Notes:

For Version 3 (full cut) → ensure good bridging performance

For Version 2 → slightly slower speed improves edge sharpness

Best visual result with white or pastel filament

Can be scaled (recommended ≥80% to keep details)