decor
ferrarif40
1
0
The model is a 3D picture of a F40 Ferrari, its a one piece print, the frame is optional. Perfect for every car fan!
Please read the following instroduction for the perfect result :
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 177x127.56mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 4.48mm and the Actual Thickness is 4.48mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#b1c3c8 PLA Prusament Galaxy Silver Transmission Distance: 6.4
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Galaxy Silver
At layer #36 (2.96mm) swap to White for the rest.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(1)
Ferrari_Front_177x128.stlDesigner
54.28 MB
2026-03-15
Attachments(1)
txt
Ferrari_describe.txt
0.62 KB
2026-03-15
