filament
swatch
display
wall
mount
bambulab
filamentswatch
board
hanger
- both - 0.2mm layer, 3 walls, 20% infill
1-disc
PLA
Designer
3
0
Summary
This is a print-in-place attachable wall mounts / hanger for the Swatch Display Board - a great tool to keep track of all the filaments!
You can find matching filament swatches here.
Variants
Depending on the desired orientation (horizontal / vertical), you will find the appropriate wall mounts in the files.
- Layer Height: 0.2 mm
- Infill: 15–20% (Grid or Gyroid)
- Perimeters/Walls: 3
- No supports!
- Print Orientation: as in the file
Installation
Attach it to the back of the display and press firmly until it clicks into place. Done!
PS: If it is loose, use a drop of superglue if necessary.
Do you like my work? I would be very happy if you would support my work on Ko-fi.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(3)
- both - Bambu Nexprint.3mfDesigner
354.22 KB
2025-10-03
horizontal wall mount.stlDesigner696.08 KB
2025-10-03
- upright wall mount.stlDesigner
602.91 KB
2025-10-03
View all(3)
