Wall-Mount Brackets for Tiaki Étagère Cage – Secure & Removable!

(Non-Official Replacement Part)

 

Boost Me (for free)

Short Summary:

Need to free up floor space? These 3D-printed wall brackets let you securely hang your Tiaki Étagère cage. Designed for easy on/off mounting – PETG required for strength. Not an official part – test fit first!

🔧 Key Features:

✔ Removable design – Lift the cage off hooks when needed
✔ Dual-hook system for stability
✔ Space-saving – Ideal for small homes or multi-cage setups

⚠️ Critical Safety Notes:

• NOT crash-proof – Do not mount where a fall could harm pets/people.
• Factory tolerances vary – May not fit all Tiaki Étagère cages.
• Professional installation advised – Ensure wall anchors support 3x the cage’s weight.
• No liability – Use at your own risk after thorough testing.

🖨️ Print & Assembly Guide:

1. Material: PETG (minimum 6 walls, 40% infill)
2. Speed: ≤60 mm/s for layer adhesion
3. Hardware: 2x ISO 4762 M6x35 screws (hex socket head)
4. Steps:
   • Replace original M6x25 screws on top corners opposite the door.
   • Mount wall hooks at correct spacing (hooks must align with bracket centers).
   • Test-load gradually before regular use.

📌 Disclaimer:

This is a community-designed part, not endorsed by Tiaki. Manufacturing tolerances and design changes may affect compatibility. Not for use with heavy loads or in high-risk areas (e.g., above beds).

🚀 Why Try It?

→ DOWNLOAD to declutter your space
→ SHARE your setup 

Need adjustments? Message me!