This is an impressive 3D-printed figure of Franky, the cyborg shipwright of the Straw Hat Pirates. The figure captures his iconic post-timeskip appearance, with his towering blue hair styled into a high-top fade, his unbuttoned Hawaiian shirt revealing his steel-hard abs, and his massive cyborg arms.

3D Printing Technical Sheet: Franky

• 3D Model: Franky "Strong World" Pose
• Designer: Uncredited creator, file likely from an anime 3D model repository
• Dimensions: Approximately 200 mm (height) x 150 mm (width) x 100 mm (depth)
• Object Weight: Approx. 150 grams

Printing Parameters and Post-processing

• Slicing Software: Cura v5.6.0
• Printer: Resin 3D Printer (e.g., Anycubic Photon M3 Plus)
• Resin:
  • Type: ABS-Like Resin (for enhanced durability)
  • Base Colors: Gray and White for the figure, with post-printing painting.
• Resin Printing Configuration:
  • Layer Height: 0.05 mm (for ultra-fine details and smooth surfaces)
  • Exposure Time per Layer: 2.5 seconds
  • Number of Base Layers: 6
  • Supports: Fine supports on all overhangs, optimized for easy removal and minimal marking.
• Estimated Print Time: 8 to 10 hours (depending on height and orientation)
• Post-processing & Finishing:
  • Washing: Cleaned with Isopropyl Alcohol (IPA) to remove excess resin.
  • Curing: Cured with UV light to fully harden the piece.
  • Sanding: Light sanding on support marks.
  • Painting: Hand-painted with acrylic paints to recreate Franky's colors, including the details of his hair, clothing, and arms.
  • Varnish: Application of a matte varnish or sealant to protect the paint and provide a professional finish.