Box for Multiple Samples: Check out here

Matching Smart Filament Sample with NFC: Check out here

This filament samples are designed to show many features as well as having a space for information about the filament

Features

• Thin walls test (3, 2, 1.5, 1mm)
• Material type display (Currently PLA, PETG, TPU, ASA, ABS and a blank version are available)
• Hole for a key ring
• Thickness/shine through test (0.2, 0.4, 0.6, 0.8, 1.0, 1.2mm)
• Round holes (2, 3, 4, 5mm diameter)
• Layer visibility test
• Area for adding information about the filament

Recommended print settings

• Layer Height: 0.2mm
• Sparse infill pattern: Cubic
• Sparse infill density: 25%
• The sum of top and bottom shell layers should be at least 6
• No supports needed

Printing and Assembly

• Optionally, you can add some sort of key chain in the top right corner (I recommend this chain (affiliate link))
• After printing, you can optionally add some sort of key chain in the top right corner of the sample
• When having many samples, you might want to also consider to print my box for them (linked at the top of the description)