5 paw patrol cookie cutters:

MarshallRubbleChaseSkyeLogo

I put an STL of each, as well as an STL of the logo.

I also attached a small shortbread recipe to enjoy these beautiful cookie cutters ;-)

Print Settings
Supports:
No
Resolution:
0.2
Infill:
0 or 10
Notes:

Printable with all printers. the exterior walls are 1.5mm. So be sure to put either:

1 layer of plaster and 0% filling (very good)2 layers with wall filling (S3D)But otherwise everything should be suitable for shortbread successful!

enjoy !