I really enjoyed assembling the blaster from mh319, but there were some things I wished it had that it didn't. So here is an overview of what has been changed or added. I created instructions to assemble it. I added screw holes, an articulated butt stock, and a functional bolt and trigger (based on the trigger mechanics that Props3D used in the Pulse Rifle). I added some detail to the scope, made removable lenses, and added a barrel core to the front of the gun. I changed the barrel end to a more accurate representation of the one seen in the movie. For this build, you will need to print all of the parts above, find the docx file and follow those instructions to build it. You will also need the following screws and nuts. You will find the stand used here with my other designs. Please post your makes of this if you decide to build it.

Screws and Nuts used:
1 m3 16mmv
1 m3 10mm
2 m2 6mm For the trigger stuff
6 m3 6mm 1 for grip , 1 for clip housing, 4 for switches
12 m3 8mm 5 for scope mount, 3 for rear and front sight, thing behind the clip
2 m3 20mm scope mount rail
2 M5 12mm screws
2 m3 12mm 1 for rear sight,
4 m3 14mm clip housing, scope rail
14 m3 6mm
2 m3 nuts

Update: For those with smaller printers, I have added a SplitA and SplitB for the second section of the main barrel.