art
painting
hueforge
goku
dragon ball
anime
dbz
Infinite Creativity
0.08mm layer height, 2 walls, 100% infill
1-disc
PETG
Designer
41
6
Project: goku.hfp
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 137.26x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
Filaments Used:
#000000 PETG pro elegoo Black Transmission Distance: 0.8
#75787b PETG pro elegoo Silver Transmission Distance: 0.3
#9ea2a2 PETG pro elegoo Gray Transmission Distance: 3
#ffffff PETG pro elegoo White Transmission Distance: 3.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Silver
At layer #12 (1.04mm) swap to Gray
At layer #18 (1.52mm) swap to White for the rest.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
No Copyright.
Models(2)
goku_Front_137x200_S_C.stlDesigner
65.90 MB
2025-05-26
- goku_Front_137x200_S_C.gcode.3mfDesigner
4.13 MB
2025-05-24
