Upload
  • toy

  • instrument

  • purge waste

  • tambourine

A nice and simple way to use up some of that purge waste.

 

The Poop Tambourine / Poop Shaker Tambourine - a simple toy filled with purge waste or purge poops.

Works without them too just not as fun.

 

The pieces clip together with the clips on the main base. Go slowly, one clip at a time is best and make sure the surrounding pegs are lined up. The pieces only fit together in one way.

 

Clipping it Together:

  1. Put the purge in one of the sides.
  2. Sit the top loosely on making sure the clips and side branches are aligned with the holes.
  3. Give it a slight push down. It should semi clip into place, you can adjust any of the side branches if needed to properly line back up.
  4. Give it another push down at each clip, going around till all of the main body clips are in place.
    1. IF any of the side branches didnt sit into their holes, be VERY gently and you should be able to bend them enough to slip in without breaking

 

As simple as this is there are some notes:

  1. You will want to use purge poops or waste that is dense for better sound.
  2. Even normal purge poops you will want to snip to avoid too soft of a sound - see images below

 

Purges to AVOID or snip for best results:

 

 

Good purge poop examples:

Originality of the Model

The author declares that this work is their personally original model

This model is licensed under the following terms:

Credit must be given to the creator

Only noncommercial uses of the work are permitted

Models(3)

  • model file image
    poop-shaker-v3-tambourine.3mfDesigner

    6.19 MB

    2026-02-11

  • model file image
    poop-tambourine-lower-half.stepDesigner

    640.03 KB

    2026-02-11

  • model file image
    poop-tambourine-upper-half.stepDesigner

    3.17 MB

    2026-02-11

  • View all(3)

No more