Low-poly model of a Fox as a 

• Toy

• Decoration

• Phone stand

• Keyring

---

If you want to sell prints of this models you can buy a commercial license
Check my bio for a Linktree
 

---

A Fox can be printed as it is or with holes as eyes where you need to put a 1.75mm filament as eyes - you can also leave it with holes

To make holes add Fox_Eyes-cut_Negative-Volume as a negative volume (right click on base model) 
Around 7mm of filament is needed. I put a longer string inside and then cut off the rest (carefully to not damage the model or yourself). If you want to install already cutted filament cut it with around 60dgr angle for best look
Pliers may be usefull to help installing the filament

Model is with a full body or with space for a phone (8-16mm - as in file names and on the bottom of models)
Phone will be at 12° angle. Should work with horizontal and vertical placing

To resize the models use the equasion:
'Needed space (in milimeters)' divided by 'model number' multiplied by 100% = 'Needed model size in percent'
For example if you need more stable 16mm you can take 10mm version resized to: 16 / 10 * 100% = 160%

To make a Keyring use a model of your choice and add Fox_Keyring-Addon. Both models should be in the exact same position in your slicer to be sure that they will merge properly
Then select both models and merge them (right click menu)
Keyring models are with a 'frame', a flat surface that will not be printed. This way it is easy to set it in the right spot - Ignore model 'errors' and DO NOT try to 'fix' the model
After merging you can easly resize or rotate the model if needed

---

Printing Tips

Printed with 0.4mm nozzle
0.1-0.2mm layer height
2-3 walls
NO supports needed
7% gyroic infill

---