Tomb / mausoleum - DND terrain

If your NOT using the print profile provided you need to print:

• 4x Wall
• 4x Gate
• 1x Roof
• 1x Base
• 1x Insert

Assembly:
Align and Glue Walls: 
Begin by gluing four of the walls together. They are designed to notch into each other for straightforward alignment. For this, I recommend using Gorilla Glue two-part epoxy. Once assembled, the walls will be securely held in place by the elevated square on the base piece.

Roof and Roof Insert: 
After printing the roof, print the roof insert. Attach the insert to the bottom of the roof, ensuring a snug fit onto the four wall pieces.

Securing the Gates: 
To secure the gates, I used epoxy putty (Milliput). Glue can work aswell

Tips for Painting the Model
Priming: Apply a black primer (Rust-Oleum Matte) to the entire model.

Base Coat: Use a mid-tone grey as the base coat.

Highlighting with Moss Green: Gradually apply brighter shades of moss green to various areas of the model. This can be done using an airbrush or a traditional brush.

Detailing with Strong Tone Ink: Paint Army Painter's Strong Tone ink into corners and crevices to add depth. Use the ink to create mottled details on some open stone areas.

Final Highlights: Finish by highlighting the outer edges with a very light green to enhance the model's details.
These steps will help you achieve a professional and polished look for your model, as demonstrated in the accompanying images.

This model is a original from Herrigold. Go check him out