Easter 3D Printing Fest
decoration
decor
easter
bunny
hueforge
wallart
3dart
hueforge art
easter decoration
- 0.08mm layer, 1 walls, 100% infill
1-disc
PLA
Designer
18
3
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Model is 120x200 mm in size. You can only modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 1.9mm and the Actual Depth is 1.9mm
It is possible to print without AMS by manually changing the filament (setting filament change or pause) in the slicer, depending on your printer and sw support.
These were my settings and colors for my print that you see in the picture. Your results may be depending on the filament you use.
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA Sunlu META Grey Transmission Distance: 3.6
PLA BambuLab Basic Orange Transmission Distance: 4.8
PLA Eleg.oo + White Transmission Distance: 6
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Grey
At layer #11 (0.96mm) swap to Orange
At layer #13 (1.12mm) swap to White for the rest.
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
This work is licensed under a Standard Digital File License. Digital files have a strict non-commercial, personal use only license.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object). You can not host these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, collect fees.
Models(2)
Easter bunny_120x200.stlDesigner
57.68 MB
2026-03-25
- Easter bunny.3mfDesigner
13.20 MB
2026-03-25
