Thank you all for your support. I'm always happy to hear your opinions and suggestions for new models. So please share them in the comments.

You can offer me a coffee and support my work here >>> https://ko-fi.com/drakeforge3d  If you like my work and want to support me, I appreciate any support. The website also includes a commercial license that allows you to sell all my existing models.

Tiny Easter Bunny in Egg

Welcome to a tiny corner of the Easter world, where spring quietly awakens and the very first bunny of the season peeks out from its shell.

This cute Easter Bunny Hatchling miniature captures that magical moment when a curious little bunny emerges from a cracked egg, discovering the bright world of spring for the very first time. Sitting on a patch of fresh grass, it looks like a tiny creature straight from a festive Easter tale.

The model is designed specifically for FDM 3D printing and is split into three separate parts for easier printing and clean assembly:

• Grass Base – a small round base with a textured grassy surface, giving the model a natural spring setting.
• Cracked Egg Shell – a cheerful egg-shaped shell with a broken top edge where the bunny appears.
• Baby Bunny – an adorable bunny with big ears and tiny paws resting on the edge of the egg.

Supports are recommended when printing the bunny part, mainly for the ears and the underside of the paws, to ensure clean results. The base and egg can typically be printed with minimal or no supports depending on your settings.

Once assembled, the model becomes a charming Easter decoration, a tabletop miniature, or a cute gift. It also works great as a paintable figure, allowing you to create your own colorful Easter palette.

Perfect for:

• Easter decorations
• seasonal gifts
• tabletop scenery
• miniature collectors
• fun painting projects

Bring a little springtime magic to your printer and let this tiny bunny hatch right on your build plate.

     Guide

Each of my models is printed 2-3 times before releasing the profile. So if you have a problem with printing:

1. DRY THE FILAMENT
2. CHANGE THE NOZZLE TO A NEW ONE.

Recommendations  Guide : In case of a problem with damage to the supports, I recommend reducing the printing speed of the supports by 30-50% and the travel speed to 400mm/s. When removing the supports, I recommend first cutting off the pieces right next to the character, but not removing them, just cutting them off. Remove the remaining larger pieces and only then detach the remaining smaller pieces. This reduces the risk of damaging delicate elements.

• Please note that if you use a different filament than the recommended one, the effect may be different from my print. For example, printing in silk PLA will look better but the supports and the print itself will be more brittle and less durable.

   

   

  Recommendations:

• 
   
• 0.08-0.2. In the event of changing the original height, the height of the supports should be changed.
   

• PLA+HS, PLA+, PLA, PLA silk Recommended materials are listed in order from best to good.

   

• Clean the plate thoroughly before printing.
  Make sure the filament is dry and free from dirt. This can damage the print or weaken the support