printinplace
case
print in place
holder
storage
batteries
battery
AA
AAA
hinge
A23
battery case
CR2032
CR2450
cr1632
9V
energizer
coin battery
duracel
27A
CR2023
- (CR1632) 0.2mm layer, 2 walls, 10% infill
1-disc
PLA
Designer - (AA) 0.2mm layer, 2 walls, 10% infill
1-disc
PLA
Designer - (AAA) 0.2mm layer, 2 walls, 10% infill
1-disc
PLA
Designer - (CR2032) 0.2mm layer, 2 walls, 10% infill
1-disc
PLA
Designer - (LR44) 0.2mm layer, 2 walls, 10% infill
1-disc
PLA
Designer - (9V) 0.2mm layer, 2 walls, 10% infill
1-disc
PLA
Designer - (23A & A27) 0.2mm layer, 2 walls, 10% infill
1-disc
PLA
Designer - (CR2450) 0.2mm layer, 2 walls, 10% infill
1-disc
PLA
Designer - (CR2016) 0.2mm layer, 2 walls, 10% infill
1-disc
PLA
Designer - (CR2025) 0.2mm layer, 2 walls, 10% infill
1-disc
PLA
Designer - (CR1632 Slim) 0.2mm layer, 2 walls, 10% infill
1-disc
PLA
Designer - (23A) 0.2mm layer, 2 walls, 10% infill
1-disc
PLA
Designer
346
77
I made these to store the most commonly used batteries for my smart home devices. It's based an old version I found on another platform. All of these were designed from scratch in Fusion 360 - printed and tested.
The battery case is designed with a print-in-place hinge mechanism for seamless operation and convenience. Its compact and efficient design makes it an ideal storage solution while ensuring the safety of batteries.
Info
Here's what you get:
In addition to the STL files, I have uploaded print settings for each type of container as well.
CR1632 - 3V Coin Cell - holds 13
CR2016 - 3V Coin Cell - holds 16
CR2025 - 3V Coin Cell - holds 16
CR2032 - 3V Coin Cell - holds 13
CR2450 - 3V Coin Cell - holds 10
LR44 - 1.5V Button - holds 20 (Updated)
23A - 12V Batteries - holds 10
23A & A27 - 12V - holds 6 of each
AA - 1.5V - holds 4
AAA - 1.5V - holds 6
9V - holds 3
Printing
Grab your favourite color PLA and start printing.
Standard 0.4 Nozzle
0.20mm Layer Height
2 Walls
10% Rectilinear Infill
No Supports!
Flat profiles (top & bottom) lie face down, so get creative with you textured build plates.
After the print - loosen the hinge by gently closing the lid - should work perfectly after that. I test printed every case with PLA.
PLEASE leave a 'LIKE' and share your makes!
Originality of the Model
The author declares that this work is their personally original model
This model is licensed under the following terms:
Credit must be given to the creator
Only noncommercial uses of the work are permitted
Remixes must be shared under the same license
Models(24)
CR2016.stlDesigner
626.35 KB
2026-03-19
CR2025.stlDesigner629.28 KB
2026-03-19
CR2032.stlDesigner613.07 KB
2026-03-19
CR2450.stlDesigner591.10 KB
2026-03-19
LR44 - New.stlDesigner619.22 KB
2026-03-19
9V.stlDesigner435.82 KB
2026-03-19
23A&A27.stlDesigner681.14 KB
2026-03-19
23A.stlDesigner659.46 KB
2026-03-19
AA.stlDesigner441.59 KB
2026-03-19
AAA.stlDesigner459.55 KB
2026-03-19
CR1632 Slim.stlDesigner603.21 KB
2026-03-19
CR1632.stlDesigner596.86 KB
2026-03-19
- CR1632.3mfDesigner
144.36 KB
2025-12-09
- AA.3mfDesigner
115.33 KB
2025-12-09
- AAA.3mfDesigner
115.36 KB
2025-12-09
- CR2032.3mfDesigner
147.54 KB
2025-12-09
- LR44.3mfDesigner
136.13 KB
2025-12-09
- 9V.3mfDesigner
110.19 KB
2025-12-09
- 23A&A27.3mfDesigner
159.08 KB
2025-12-09
- CR2450.3mfDesigner
143.08 KB
2025-12-09
- CR2016.3mfDesigner
147.90 KB
2025-12-09
- CR2025.3mfDesigner
149.26 KB
2025-12-09
- CR1632 Slim.3mfDesigner
148.48 KB
2025-12-09
- 23A.3mfDesigner
154.19 KB
2025-12-09
View all(24)
