Flame Sphere - Traditional - Print-Ready Miniature by Mike Gyver Minis! ⚔️🎲

A miniature as part of my spell series, depicting the spell Flame Sphere, in a more traditional flaming fireball sculpt

Part of my project building high-quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! 🐉

⭐ Why Mike Gyver Minis? ⭐

🎨 Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.

🔬 Rigorously Tested: Printed successfully multiple times on Bambu Lab X1C/P2S & K2 Plus (see photos for real print results!).

⚙️ Ready-to-Print Files (Multi-Slicer Support!): Includes TWO tuned `.3mf` project files!

    1. For Bambu Studio / OrcaSlicer / PrusaSlicer (`..._FDMConfig.3mf`)

    2. For Creality Print (`..._FDMConfig_CP.3mf`)

* Both have tested FDM support settings configured! Also includes an unsupported .stl.

💖 FREE Model! Get the Full, Ever-Growing Library Instantly! 💖

Like this quality? Support the project, get my entire, organized library (updated weekly!) and 1-on-1 print support via Patreon:

➡️ https://www.patreon.com/MikeGyverMinis ⬅️

Explore All My Free Model Sites:

➡️ https://linktr.ee/mikegyverminis 🔗

Spend less time troubleshooting, more time playing! 🎉

---

 🛠️ Print Settings & Advice 🛠️

* Printer Used for Testing: Bambu Lab X1C / P2S / K2 Plus (CoreXY)

    * Note: Tested extensively. Results may vary based on your printer type, calibration, and filament.

* Supports: Yes - Use the included `.3mf` file for your slicer! (Recommended!)

* Layer Height: 0.08mm

* Infill: 15% Gyroid

* Filament: PLA (Tested with Bambu PLA Basic Blue Grey)

🔥 Important Printing Advice:

1.  Prep Matters! 🔑: A Calibrated printer, Clean build plate (🧼 soap & water!), and Dry filament (💧➡️🔥) are essential for success!

2.  Support Removal:

    * COOL DOWN COMPLETELY first! 🥶

    * Use tweezers/cutters ✂️ carefully, starting at the base/brim. Pull supports *down & away*.

    * Be extra gentle on thin parts like [Model Part - e.g., swords, fingers, spikes]. 👀 Slow is smooth!

    * Minor cleanup (light sanding) where supports touch is normal. ✨

⚙️ .3mf File Info (Please Read!):

* This download includes TWO project files for your convenience:

    * 1. ..._FDMConfig.3mf: For Bambu Studio, OrcaSlicer, & PrusaSlicer.

    * 2. ..._FDMConfig_CP.3mf: For Creality Print.

* Both files contain the model pre-oriented with my tested FDM support settings.